Automatic Systems TRS373 Technical Manual page 32

p. 32/48
C
4.4.3. Housing assembly
First of all, remove the doors and the roof;
Using a forklift, lift and move the housing over the previously mounted vertical elements;
The information contained in this document is the property of Automatic Systems and is confidential. The recipient shall refrain from using this information for any purpose
other than the use of the products or the execution of the project to which it refers and from communicating it to third parties without prior written agreement of Automatic
Systems. The document is subject to change without notice.
TRS373-MT-EN-01
B
Check that upright protectors (F) are present at the points where fixed panels come into
contact with the housing. [ Fig. 22]
E
D
Fig. 20
Fig. 21
A
p. 32/48