Recording With One-Touch Recording - Aiwa HV-MX100U Operating Instructions Manual

Recording with One-Touch
Recordimz
Using One-Touch Playback after timer recording (see page
19) is convenient. You can make timer recordings and play
back only the portion you just recorded with the timer by
pressing a single button later.
'OOOC3°
Es
000
000
0
0000
00
u
\
000,
v
OTPB
o
You can immediately start recording the current channel for
a specified time with One-Touch Recording.
POWER
o
—
STOP m
PAUSE13TILL
o- 11
Before starting
Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
Check that the REC SYSTEM button corresponding to the
color system in which you want to record is pressed.
Select the channel to record and tape speed.
LYJ
o —
STOP
Press W STOP to stop recording (when
recording without timer).
ONE-TOUCH PLAYBACK on the VCR lights.
If another operation button is-pressed after you stop'
recording, One-Touch Playback will be canceled.
Press ONE-TOUCH PLAYBACK on the VCR or
OTPB on the remote control.
The tape rewinds to the start of the recorded portion and
begins playback.
When you set the timer for more than two
timer programs
ThevcR starts playing
back
from the earliest one
when you
use One-Touch Playback.
To find the beginning of the second (or later) program, use
Inclex Search (page 16).
One-Touch Playback does not work for recordings of less than
20 seconds in SP mode, 40 seconds in LP mode and 1 minute
in E=Pmode.
1
2
REC/OTR
Q
-
/
Press REC/OTR twice.
The VCR starts recording, and "OTR," tape speed and
"_ ,
" appear on the TV screen.
——
1
OTR SP -:--
I
Within five seconds, press REC/OTR
repeatedly to set the recording duration.
Each press changes the recording duration on the TV
screen in the following way:
0:30 + 1:00 + 1:30 + ..... + 5:30
I
REC
(Regular recording) ~ 6:00 J
When the recording time indicator counts down to "0:00",
recording stops and the VCR turns off.
1
OTRSP 0:30
I I
ENGLISH
18