Recording With One-Touch Recording - Aiwa VX-S137U Operating Instructions Manual

Playing back the portion you just
recorded – One-Touch Playback
Using One-Touch Playback after VCR Plus+® system (page
25) or manual timer recording (page 27) is convenient. You
can make timer recordings and play back only the portion
you just recorded with the timer by pressing a single button
later.
1
Stop recording (when recording without timer).
The ONE-TOUCH PLAYBACK button on the unit lights.
If another operation button is pressed after you stop
recording, One-Touch Playback will be canceled and the
ONE-TOUCH PLAYBACK button on the unit lights off.
2
Press ONE-TOUCH PLAYBACK on the unit or OTPB
on the remote control.
The tape rewinds to the start of the recorded portion and
begins playback.
When you set the timer for more than two
timer programs
The unit starts playing back from the earliest one when you
use One-Touch Playback.
To find the beginning of the second (or later) program, use
Index Search.
Note
One-Touch Playback does not work for recordings of less than
1 minute.
OTPB
VX-S207
ONE-TOUCH PLAYBACK
Recording with One-Touch
Recording
You can immediately start recording the current channel for
a specified time with One-Touch Recording.
wREC/OTR
TIMER REC indicator
Before starting
• Insert a cassette with its erasure prevention tab in place.
Make sure the tape is longer than the recording time.
• Select the channel to record and tape speed.
1
Press w REC/OTR.
The unit starts recording.
• "INDEX" flashes for a few seconds.
• The w REC/OTR button on the unit lights.
2
Press w REC/OTR repeatedly to set the
recording duration.
Each press changes the recording duration on the
screen in the following way:
0:30 1:00 1:30
normal recording
After the set amount of time has elapsed, the recording
stops.
wREC/OTR
sSTOP
VX-S207
Z
STOP/EJECT
2:00 3:00
5:00 4:00
24
ENGLISH