Duplicating A Tape Recorded In Different Color System - Aiwa HV-MX100U Operating Instructions Manual

'Duplicating.a tape recorded
in different color system
INPUT
~–
n
0000
Ed
000
0'00
0
0000
00
. 00
0
e+
e
-b
3EI
Qo
000 0
00 0
000-
m
v
REC/OTR '
Q
—0
I
I
REC SYSTEM OUTPUT SYSTEM
(NTSC, PAL, SECAM/MESECAM,
(NTSC, PAL, SECAM,
M-PAL, N-PAL)
M-PAL, N-PAL)
Before starting
Connect with another VCR, See page 21.
Example
To duplicate a PAL tape using the NTSC
~
Press the REC SYSTEM button corresponding .
to the color system in which you want to
record.
The Rec System indicator of the color system you
selected appears in the display window.
I
Rec System indicator
2 Press the OUTPUT SYSTEM buttQn
corresponding to the color system of you TV.
The Output System indicator of the color system you
selected appears in the display window.
You can monitor the recording picture on your TV.
Output System indicator
13
ENGLISH
s Insert a PAL tape into another (playback) VCR.
z Insert a blank cassette with its erasure
prevention tab in place into your HV-MXI 00
(recording) VCR.
5 Press INPUT to display "LINE1" (rear) or
"LINE2" (front) on the TV screen.
6
Press T.SPEED to select the tape speed,
The tape speed that can be selected with the Rec
System differs as mentioned below:
NTSC, M-PAL: SP or EP
PAL, SECAM, MESECAM, N-PAL: SP or EP
z
Set the other VCR to playback.
The Input System PAL indicator appears in the display.
=
I
Input System indicator
8
Press. REC/OTR on the recording VCR.
@
"P
If the
incorrect input system indicator appears, set the color
system manually. See page 25.