Replacing The Desktop Front Panel - NEC POWERMATE P2166 Manual

Replace the drive bracket (see "Replacing the Desktop
8.
3 1/2-Inch Drive Bracket").

Replacing the Desktop Front Panel

Replace the front panel only after it has been removed for a
5 1/4-inch device installation. If installing a 5 1/4-inch
device, see "Installing the Desktop 5 1/4-Inch Device."
1. Align the four front panel tabs with the holes in the front
of the system unit.
Evenly press the front panel into position until the tabs
2.
lock the panel in place.
Replace the system unit cover.
3.
4. Run the Setup program to set the new configuration.
3-52 Installing Options
Aligning the front panel