Replacing The Right Side Door - NEC I-Select TW100 User Manual

I-Select TS100 / I-Select TW100 User Guide - Upgrading Your System

Replacing the Right Side Door

Avoid damaging your system - before replacing the right side door, make sure no
cables or other devices protrude from the chassis.
sure to fasten it securely to the chassis before restoring the
cover. The front panel must be securely connected to the
chassis before you replace the cover.
1. Take a few moments to examine the interior side of the cover, and notice the 2
rails on two separate edges and the 3 slots located on a third edge.
2. Leaving about 1 centimetre to slide the cover forward, lay the cover on the chas-
sis, and check that the rail is ready to slide on its corresponding edge and that the
slots are ready to fit with their corresponding metal hooks. You may find this
procedure easier to follow if you lay the unit on the left side.
3. Make sure the cover is properly inserted; the cover, the chassis and the front
panel should fit squarely together.
4. Push the release latch down.
5. Lock the key.
Note: If you have previously removed the front panel, be
4 - 5