Download Print this page

Omtech SH-G1390 User Manual page 39

130w / co2 cabinet laser engraver

Advertisement

1.
Open the top of the crate.
2. Carefully remove the packaging and foam insulation from the sides and set them aside. With
at least one other person, use the two straps around the engraver to lift it out of the crate and
move it to a sturdy table or countertop.
3. Carefully remove the straps and plastic packaging from around the engraver.
4. Open the cover and take out all the parts.
Make sure that you have received all listed accessories in the package list (see
List
on Page 13.
5. Carefully remove any remaining interior packaging and stays—including the strap around the
laser head—and set them aside.
The laser tube is a highly fragile object and should be handled delicately and as little as possible.
You may keep the packaging in case of future return but, if you dispose of it or any accessories, be
sure to do so in compliance with applicable waste disposal regulations.
4.4 Installing the Water Cooling System
See your water cooling system's manual for reference to ensure that the water used remains cool,
clean, and pure.
It is recommended that you use a double-hose water chiller with this machine.
32
§ 2.4 Package

Advertisement

loading
Need help?

Need help?

Do you have a question about the SH-G1390 and is the answer not in the manual?