Omtech SH-G1390 User Manual page 64

5 Operation
5.8.2 Setting Laser Speed
Push Speed when the screen is on the main interface. The display will show:
Press numbers and/or Backspace to set and
modify the parameters. After modifying, press
Enter to save the parameters. Press Esc to
cancel the modification parameters. The speed
interface will disappear and return to the main
interface.
5.8.3 Setting Laser Power & Disabling the Second Laser
Push Power when the screen is on the main interface. The display will show:
Press numbers and/or Backspace to set and
modify each parameter. Press the direction keys
to select other parameters for modification. Set
either laser tube's maximum power to 0% to
disable it. When the parameters are modified,
press Enter to save the parameters or press
ESC to cancel the changes. After selection, the
power interface disappears and returns to the
main interface.
57