Omtech SH-G1390 User Manual page 69

5.8.8 Setting Origins
In the menu interface, select Origin Setting and press Enter. The display will show:
Press Enter to enable or disable the origin setting. To choose an origin location, press Enter and
then Shift when hovering over an Origin option on the control panel. This will enable you to modify
the X- and Y-axes of the origin using the direction keys. To confirm your selection, press Origin and
Shift to exit to the previous menu.
When selecting Start Origin, press Enter to enter the modification, and press ▲ or ▼ to modify.
After the modification, press Enter, and the parameters automatically take effect. Press Esc to
return to the menu interface. Multiple origins can be selected simultaneously. When multiple origins
are selected, the order of origins will always cycle numerically from 1 to 4.
62