Omtech SH-G1390 User Manual page 17

This machine CANNOT be used with THE FOLLOWING MATERIALS OR WITH ANY MATERIALS
WHICH INCLUDE THEM:
• Artificial Leather containing Hexavalent Chromium (Cr[VI]), due to its toxic fumes
• Astatine, due to its toxic fumes
• Beryllium Oxide, due to its toxic fumes
• Bromine, due to its toxic fumes
• Chlorine, including Polyvinyl Butyral (PVB) and Polyvinyl Chloride (PVC, Vinyl, Cintra, etc.),
due to its toxic fumes
• Fluorine, including Polytetrafluoroethylenes (Teflon, PTFE, etc.), due to its toxic fumes
• Iodine, due to its toxic fumes
• Metals, due to their conductivity and reflectivity
• Phenolic Resins, including various forms of Epoxy, due to their toxic fumes
• Polycarbonate (PC, Lexan, etc.), due to its toxic fumes
For all other materials, if you are unsure about its safety or laserability with this device, seek out its
material safety data sheet (MSDS). Alternatively, contact our support department for further guidance.
Pay especial attention to information about safety, toxicity, corrosiveness, reflectivity, and reaction(s)
to high heat. Never operate the laser on any (such as PVC, teflon, and other halogen- containing
substances) that can produce corrosive, hazardous, or even deadly fumes.
1.8 Disposal Safety Instructions
Electrical products should not be disposed of with household products. In the EU and
UK, according to the European Directive 2012/19/EU for the disposal of electrical and
electronic equipment and its implementation in national laws, used electrical products
must be collected separately and disposed of at the collection points provided for
this purpose. Locations in Australia, Canada, and the United States may have similar
regulations. Contact your local authorities or dealer for advice.
CAN NOT be used
10