Omtech SH-G1390 User Manual page 75

5.8.21 Entering Passwords
When you enter certain interfaces or perform certain operations, you need to enter the password.
The password interface is similar to that above:
You can enter the password directly by pressing
numbers or you can select a number or letter by
pressing the direction keys, select by pressing
Enter, and press Enter again after entering
six characters. If the password is correct, you
can go to the next interface or perform the
operation. Otherwise, it will display Password
Error and you can re-enter it. Press Esc to return
to the previous menu.
5.8.22 Setting Jog Distance
Select Manual Setting in the functions menu and press Enter. The display will show:
Manual mode has Continue and Manual settings,
press Enter to enter the modification mode, ▲
or ▼ to select, and Enter to exit the modification
mode. After all modifications, select Write
Parameters and press Enter. Press Esc to
return to the previous menu. When Continue
is selected, Manual settings will not work and
vice versa. When Continue is selected, pressing
a direction arrow will move the corresponding
axis until the key is released. When Manual is
selected, pressing a direction arrow will move
the laser heads along the corresponding axis
this pre-determined amount.
68