Omtech SH-G1390 User Manual page 52

5 Operation
5.1 Operation Overview
Operate this laser engraver only in accordance with all the instructions provided
in this manual.
Failure to follow these instructions can result in property damage and personal
injury.
Wear safety glasses during the entire test process!
This section will address only some of the options and features provided by the operation software.
Before beginning to use the machine, make sure that you have read this entire manual (particularly
§ Safety Information
on Page 1), the separate software manual, and any warnings provided on the
machine itself.
Here is the process flow diagram for operation:
Start your machine
1
5.2.1 Turning on the Machine
(Page 46)
Zero in
4
5.3 Focusing
(Page 48)
Engrave
5
5.4 Engraving
(Page 49)
Ready your material
2
5.2.2 Preparing Materia
(Page 47)
Ready your design
3
5.2.3 Preparing the Engraving Pattern
(Page 47)
Finish up
6
5.5 Wrapping-up
(Page 49)
45