Omtech SH-G1390 User Manual page 2

BEAMING
WITH
POSSIBILITIES!
Thank you for choosing omtech!
Your new CO ₂ laser engraving machine is intended for personal and professional use. When used
under these instructions, it falls under the category of a CLASS 1 laser product. But it includes a
CLASS 4 laser and some components remain extremely dangerous under improper and/or non-
intended use. Never disable the preinstalled safety engravers and always use your laser safely and
responsibly.
Read this manual carefully before operation. It covers the details of correct installation, adjustment,
maintenance, and—most importantly—safe operation of your new laser. It is intended to be used in
conjunction with your engraving software manual, as the software typically does not only provide
image design but also serves as an alternative interface for the laser settings and machine controls.
You and any other users of this engraver should thoroughly understand BOTH manuals before
attempting to operate the laser.
Keep both manuals for future reference and provide them to ANYONE who will install, operate,
maintain, or repair this machine. Both manuals should be included if this engraver is given or sold to a
third party.
If you have any questions after reading these manuals, please contact us and our support department
will address your concerns as soon as possible.