The Snat Status Screen - ZyXEL Communications ZYWALL USG 20 Manual

Table 226 Maintenance > Packet Flow Explore > Routing Status (continued)
LABEL
Next Hop
Info
The following fields are available if you click 1-1 SNAT in the Routing Flow section.
#
NAT Rule
Source
Destination
Outgoing
Gateway
The following fields are available if you click SiteToSite VPN or Dynamic VPN in the
Routing Flow section.
#
Source
Destination
VPN Tunnel
The following fields are available if you click Default WAN Trunk in the Routing Flow
section.
#
Source
Destination
Trunk

47.3 The SNAT Status Screen

The SNAT Status screen allows you to view and quickly link to specific source
NAT (SNAT) settings. Click a function box in the SNAT Flow section, the related
SNAT rules (activated) will display in the SNAT Table section. To access this
screen, click Maintenance > Packet Flow Explore > SNAT Status.
The order of the SNAT flow may vary depending on whether you:
• select use default SNAT in the CONFIGURATION > Network > Interface >
Trunk screen.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
• This is the main route if the next hop type is Auto.
• This is the interface name and gateway IP address if the next hop
type is Interface /GW.
• This is the tunnel name if the next hop type is VPN Tunnel.
• This is the trunk name if the next hop type is Trunk.
This field is a sequential value, and it is not associated with any entry.
This is the name of an activated 1:1 or Many 1:1 NAT rule in the NAT table.
This is the original source IP address(es). any means any IP address.
This is the original destination IP address(es). any means any IP address.
This is the name of an interface which transmits packets out of the ZyWALL.
This is the IP address of the gateway in the same network of the outgoing
interface.
This field is a sequential value, and it is not associated with any entry.
This is the IP address(es) of the local VPN network.
This is the IP address(es) for the remote VPN network.
This is the name of the VPN tunnel.
This field is a sequential value, and it is not associated with any entry.
This is the source IP address(es) from which the packets are sent. any
means any IP address.
This is the destination IP address(es) to which the packets are transmitted.
any means any IP address.
This is the name of the WAN trunk through which the matched packets are
transmitted.
Chapter 47 Packet Flow Explore
719