ZyXEL Communications ZYWALL USG 20 Manual page 632

Chapter 43 System
a software mechanism to set the time manually or get the current time and date
from an external server.
To change your ZyWALL's time based on your local time zone and date, click
Configuration > System > Date/Time. The screen displays as shown. You can
manually set the ZyWALL's time and date or have the ZyWALL get the date and
time from a time server.
Figure 369 Configuration > System > Date and Time
The following table describes the labels in this screen.
Table 192 Configuration > System > Date and Time
LABEL
Current Time and
Date
Current Time
Current Date
Time and Date
Setup
Manual
632
DESCRIPTION
This field displays the present time of your ZyWALL.
This field displays the present date of your ZyWALL.
Select this radio button to enter the time and date manually. If you
configure a new time and date, time zone and daylight saving at the
same time, the time zone and daylight saving will affect the new time
and date you entered. When you enter the time settings manually, the
ZyWALL uses the new setting once you click Apply.
ZyWALL USG 20/20W User's Guide