Security Parameters Summary - ZyXEL Communications ZYWALL USG 20 Manual

Appendix C Wireless LANs
The AP and wireless clients use the TKIP or AES encryption process, the PMK and
4
information exchanged in a handshake to create temporal encryption keys. They
use these keys to encrypt data exchanged between them.
Figure 454 WPA(2)-PSK Authentication

Security Parameters Summary

Refer to this table to see what other security parameters you should configure for
each authentication method or key management protocol type. MAC address
filters are not dependent on how you configure these security features.
Table 273 Wireless Security Relational Matrix
AUTHENTICATION
METHOD/ KEY
MANAGEMENT
PROTOCOL
Open
Open
Shared
WPA
WPA-PSK
WPA2
WPA2-PSK
816
ENCRYPTIO ENTER
N METHOD MANUAL KEY
None No
WEP No
Yes
Yes
WEP No
Yes
Yes
TKIP/AES No
TKIP/AES Yes
TKIP/AES No
TKIP/AES Yes
IEEE 802.1X
Disable
Enable without Dynamic WEP Key
Enable with Dynamic WEP Key
Enable without Dynamic WEP Key
Disable
Enable with Dynamic WEP Key
Enable without Dynamic WEP Key
Disable
Enable
Disable
Enable
Disable
ZyWALL USG 20/20W User's Guide