Ftp; Configuring Ftp - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 43 System
Table 204 Configuration > System > TELNET (continued)
LABEL
#
Zone
Address
Action
Apply
Reset

43.10 FTP

You can upload and download the ZyWALL's firmware and configuration files using
FTP. To use this feature, your computer must have an FTP client. Please see
Chapter 45 on page 693
files.

43.10.1 Configuring FTP

To change your ZyWALL's FTP settings, click Configuration > System > FTP tab.
The screen appears as shown. Use this screen to specify from which zones FTP can
668
DESCRIPTION
This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the ZyWALL's (non-
configurable) default policy. The ZyWALL applies this to traffic that does
not match any other configured rule. It is not an editable rule. To apply
other behavior, configure a rule that traffic will match so the ZyWALL will
not have to use the default policy.
This is the zone on the ZyWALL the user is allowed or denied to access.
This is the object name of the IP address(es) with which the computer is
allowed or denied to access.
This displays whether the computer with the IP address specified above
can access the ZyWALL zone(s) configured in the Zone field (Accept) or
not (Deny).
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
for more information about firmware and configuration
ZyWALL USG 20/20W User's Guide