ZyXEL Communications ZYWALL USG 20 Manual page 237

Each field is explained in the following table.
Table 54 Configuration > Network > Interface > PPP > Add
LABEL
Show Advance
Settings / Hide
Advance Settings
General Settings
Enable
Interface
Interface
Properties
Interface
Name
Base Interface
Description
Connectivity
Nailed-Up
Dial-on-
Demand
ISP Setting
Account Profile Select the ISP account that this PPPoE/PPTP interface uses. The drop-
Protocol
User Name
Service Name
IP Address
Assignment
Get
Automatically
Use Fixed IP
Address
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Click this button to display a greater or lesser number of configuration
fields.
Select this to enable this interface. Clear this to disable this interface.
Specify a name for the interface. It can use alphanumeric characters,
hyphens, and underscores, and it can be up to 11 characters long.
Select the interface upon which this PPP interface is built.
Note: Multiple PPP interfaces can use the same base interface.
Enter a description of this interface. It is not used elsewhere. You can
use alphanumeric and
()+/:=?!*#@$_%-
up to 60 characters long.
Select this if the PPPoE/PPTP connection should always be up. Clear
this to have the ZyWALL establish the PPPoE/PPTP connection only
when there is traffic. You might use this option if a lot of traffic needs
to go through the interface or it does not cost extra to keep the
connection up all the time.
Select this to have the ZyWALL establish the PPPoE/PPTP connection
only when there is traffic. You might use this option if there is little
traffic through the interface or if it costs money to keep the
connection available.
down box lists ISP accounts by name. Use Create new Object if you
need to configure a new ISP account (see
details).
This field is read-only. It displays the protocol specified in the ISP
account.
This field is read-only. It displays the user name for the ISP account.
This field is read-only. It displays the PPPoE service name specified in
the ISP account. This field is blank if the ISP account uses PPTP.
Click Show Advanced Settings to display more settings. Click Hide
Advanced Settings to display fewer settings.
Select this if this interface is a DHCP client. In this case, the DHCP
server configures the IP address automatically. The subnet mask and
gateway are always defined automatically in PPPoE/PPTP interfaces.
Select this if you want to specify the IP address manually.
Chapter 11 Interfaces
characters, and it can be
Chapter 40 on page 611 for
237