Tables And Lists - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 3 Web Configurator
The fields vary with the type of object. The following table describes labels that
can appear in this screen.
Table 9 Object References
LABEL
Object Name
#
Service
Priority
Name
Description
Refresh
Cancel
3.3.3.4 CLI Messages
Click CLI to look at the CLI commands sent by the Web Configurator. These
commands appear in a popup window, such as the following.
Figure 15 CLI Messages
Click Clear to remove the currently displayed information.
See the Command Reference Guide for information about the commands.

3.3.4 Tables and Lists

The Web Configurator tables and lists are quite flexible and provide several
options for how to display their entries.
54
DESCRIPTION
This identifies the object for which the configuration settings that use it
are displayed. Click the object's name to display the object's
configuration screen in the main window.
This field is a sequential value, and it is not associated with any entry.
This is the type of setting that references the selected object. Click a
service's name to display the service's configuration screen in the main
window.
If it is applicable, this field lists the referencing configuration item's
position in its list, otherwise N/A displays.
This field identifies the configuration item that references the object.
If the referencing configuration item has a description configured, it
displays here.
Click this to update the information in this screen.
Click Cancel to close the screen.
ZyWALL USG 20/20W User's Guide