Ip Static Route Screen - ZyXEL Communications ZYWALL USG 20 Manual

Unified security gateway
Hide thumbs Also See for ZYWALL USG 20:
Table of Contents

Advertisement

Table 79 Configuration > Network > Routing > Policy Route > Edit (continued)
LABEL
Maximum
Bandwidth
Bandwidth
Priority
Maximize
Bandwidth
Usage
OK
Cancel

13.3 IP Static Route Screen

Click Configuration > Network > Routing > Static Route to open the Static
Route screen. This screen displays the configured static routes. Configure static
routes to be able to use RIP or OSPF to propagate the routing information to other
routers.
Figure 187 Configuration > Network > Routing > Static Route
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Specify the maximum bandwidth (from 1 to 1048576) allowed for the
route in kbps. If you enter 0 here, there is no bandwidth limitation for
the route.
If the sum of the bandwidths for routes using the same next hop is
higher than the actual transmission speed, lower priority traffic may not
be sent if higher priority traffic uses all of the actual bandwidth.
To reserve bandwidth for traffic that does not match any of the policy
routes, leave some of the interface's bandwidth unbudgeted and do not
enable Maximize Bandwidth Usage.
Enter a number between 1 and 7 to set the priority for traffic. The
smaller the number, the higher the priority. If you set the maximum
bandwidth to 0, the bandwidth priority will be changed to 0 after you
click OK. That means the route has the highest priority and will get all
the bandwidth it needs up to the maximum available.
A route with higher priority is given bandwidth before a route with lower
priority.
If you set routes to have the same priority, then bandwidth is divided
equally amongst those routes.
Select this check box to have the ZyWALL divide up all of the interface's
unallocated and/or unused bandwidth among the policy routes that
require bandwidth. Do not select this if you want to reserve bandwidth
for traffic that does not match any of the policy routes.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving.
Chapter 13 Policy and Static Routes
307

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall usg 20wZywall usg 2000

Table of Contents