ZyXEL Communications ZYWALL USG 20 Manual page 686

Chapter 44 Log and Report
Table 212 Configuration > Log & Report > Log Setting > Edit (System Log)
LABEL
E-mail Server 1
E-mail Server 2
#
Log Category
System log
E-mail Server 1
E-mail Server 2
Log Consolidation
686
DESCRIPTION
Use the E-Mail Server 1 drop-down list to change the settings for
e-mailing logs to e-mail server 1 for all log categories.
Using the System Log drop-down list to disable all logs overrides
your e-mail server 1 settings.
enable normal logs (green check mark) - e-mail log messages for
all categories to e-mail server 1.
enable alert logs (red exclamation point) - e-mail alerts for all
categories to e-mail server 1.
Use the E-Mail Server 2 drop-down list to change the settings for
e-mailing logs to e-mail server 2 for all log categories.
Using the System Log drop-down list to disable all logs overrides
your e-mail server 2 settings.
enable normal logs (green check mark) - e-mail log messages for
all categories to e-mail server 2.
enable alert logs (red exclamation point) - e-mail alerts for all
categories to e-mail server 2.
This field is a sequential value, and it is not associated with a
specific address.
This field displays each category of messages. It is the same value
used in the Display and Category fields in the View Log tab. The
Default category includes debugging messages generated by open
source software.
Select which events you want to log by Log Category. There are
three choices:
disable all logs (red X) - do not log any information from this
category
enable normal logs (green checkmark) - create log messages
and alerts from this category
enable normal logs and debug logs (yellow check mark) -
create log messages, alerts, and debugging information from this
category; the ZyWALL does not e-mail debugging information,
however, even if this setting is selected.
Select whether each category of events should be included in the
log messages when it is e-mailed (green check mark) and/or in
alerts (red exclamation point) for the e-mail settings specified in E-
Mail Server 1. The ZyWALL does not e-mail debugging
information, even if it is recorded in the System log.
Select whether each category of events should be included in log
messages when it is e-mailed (green check mark) and/or in alerts
(red exclamation point) for the e-mail settings specified in E-Mail
Server 2. The ZyWALL does not e-mail debugging information,
even if it is recorded in the System log.
ZyWALL USG 20/20W User's Guide