ZyXEL Communications ZYWALL USG 20 Manual page 785

CODE DESCRIPTION
CRL is too old.
15
CRL is not valid.
16
CRL signature was not verified correctly.
17
CRL was not found (anywhere).
18
CRL was not added to the cache.
19
CRL decoding failed.
20
CRL is not currently valid, but in the future.
21
CRL contains duplicate serial numbers.
22
Time interval is not continuous.
23
Time information not available.
24
Database method failed due to timeout.
25
Database method failed.
26
Path was not verified.
27
Maximum path length reached.
28
Table 258 Interface Logs
LOG MESSAGE
Interface %s has been
deleted.
Create interface %s
has been failed.
Base interface %s is
disabled. Interface %s
is disabled now.
Interface %s has been
changed.
Interface %s has been
added.
Interface %s is
enabled.
Interface %s is
disabled.
%s MTU > (%s MTU - 8),
%s may not work
correctly.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
An administrator deleted an interface. %s is the interface
name.
When PPP can't running fail, %s: interface name.
When user disable ethernet, vlan or bridge interface and this
interface is base interface of PPP or virtual interface. PPP and
virtual will disable too. 1st %s is interface name, 2nd %s is
interface.
An administrator changed an interface's configuration. %s:
interface name.
An administrator added a new interface. %s: interface name.
An administrator enabled an interface. %s: interface name.
An administrator disabled an interface. %s: interface name.
An administrator configured a PPP interface, PPP interface
MTU > (base interface MTU - 8), PPP interface may not run
correctly because PPP packets will be fragmented by base
interface and the peer will not receive correct PPP packets.
1st %s: PPP interface name, 2nd %s: ethernet interface
name.
Appendix A Log Descriptions
785