Configure Zones - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 7 Tutorials
Click Configuration > Network > Interface > Ethernet and double-click the
1
lan2 interface's entry.
The Interface Type should be internal.
Set the IP Address to 192.168.4.1 and the Subnet Mask to 255.255.255.0.
Set DHCP to DHCP Server and click OK.
Figure 57 Configuration > Network > Interface > Ethernet > Edit lan2

7.1.4 Configure Zones

Do the following to create a VPN zone.
Click Configuration > Network > Zone and then the Add icon.
1
110
ZyWALL USG 20/20W User's Guide