ZyXEL Communications ZYWALL USG 20 Manual page 197

screen appears. Click a column's heading cell to sort the table entries by that
column's criteria. Click the heading cell again to reverse the sort order.
Figure 147 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Table 38 Monitor > VPN Monitor > IPSec
LABEL
Name
Policy
Search
Disconnect
Total Connection
connection per
page
Page x of x
#
Name
Encapsulation
Policy
Algorithm
Up Time
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Enter the name of a IPSec SA here and click Search to find it (if it is
associated). You can use a keyword or regular expression. Use up to
30 alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See
9.12.1 on page 198 for more details.
Enter the IP address(es) or names of the local and remote policies for
an IPSec SA and click Search to find it. You can use a keyword or
regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See
more details.
Click this button to search for an IPSec SA that matches the
information you specified above.
Select an IPSec SA and click this button to disconnect it.
This field displays the total number of associated IPSec SAs.
Select how many entries you want to display on each page.
This is the number of the page of entries currently displayed and the
total number of pages of entries. Type a page number to go to or use
the arrows to navigate the pages of entries.
This field is a sequential value, and it is not associated with a specific
SA.
This field displays the name of the IPSec SA.
This field displays how the IPSec SA is encapsulated.
This field displays the content of the local and remote policies for this
IPSec SA. The IP addresses, not the address objects, are displayed.
This field displays the encryption and authentication algorithms used in
the SA.
This field displays how many seconds the IPSec SA has been active.
This field displays N/A if the IPSec SA uses manual keys.
Chapter 9 Monitor
Section 9.12.1 on page 198
Section
for
197