ZyXEL Communications ZYWALL USG 20 Manual page 272

Chapter 11 Interfaces
Table 66 Configuration > Network > Interface > VLAN > Edit (continued)
LABEL
Lease time
Enable IP/MAC
Binding
Enable Logs
for IP/MAC
Binding
Violation
Static DHCP
Table
Add
Edit
Remove
#
IP Address
MAC Address
Description
RIP Setting
Enable RIP
Direction
Send Version
Receive
Version
V2-Broadcast
272
DESCRIPTION
Specify how long each computer can use the information (especially
the IP address) before it has to request the information again.
Choices are:
infinite - select this if IP addresses never expire
days, hours, and minutes - select this to enter how long IP
addresses are valid.
Select this option to have the ZyWALL enforce links between specific
IP addresses and specific MAC addresses for this VLAN. This stops
anyone else from manually using a bound IP address on another
device connected to this interface. Use this to make use only the
intended users get to use specific IP addresses.
Select this option to have the ZyWALL generate a log if a device
connected to this VLAN attempts to use an IP address that is bound to
another device's MAC address.
Configure a list of static IP addresses the ZyWALL assigns to
computers connected to the interface. Otherwise, the ZyWALL assigns
an IP address dynamically using the interface's IP Pool Start
Address and Pool Size.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
This field is a sequential value, and it is not associated with a specific
entry.
Enter the IP address to assign to a device with this entry's MAC
address.
Enter the MAC address to which to assign this entry's IP address.
Enter a description to help identify this static DHCP entry. You can use
alphanumeric and ()+/:=?!*#@$_%- characters, and it can be up to
60 characters long.
See Section 14.2 on page 314
Select this to enable RIP on this interface.
This field is effective when RIP is enabled. Select the RIP direction
from the drop-down list box.
BiDir - This interface sends and receives routing information.
In-Only - This interface receives routing information.
Out-Only - This interface sends routing information.
This field is effective when RIP is enabled. Select the RIP version(s)
used for sending RIP packets. Choices are 1, 2, and 1 and 2.
This field is effective when RIP is enabled. Select the RIP version(s)
used for receiving RIP packets. Choices are 1, 2, and 1 and 2.
This field is effective when RIP is enabled. Select this to send RIP-2
packets using subnet broadcasting; otherwise, the ZyWALL uses
multicasting.
for more information about RIP.
ZyWALL USG 20/20W User's Guide