ZyXEL Communications ZYWALL USG 20 Manual page 788

Appendix A Log Descriptions
Table 258 Interface Logs (continued)
LOG MESSAGE
"SIM card of interface
cellular%d in %s is
damaged or not
inserted. Please
remove the device,
then check the SIM
card.
"SIM card of interface
cellular%d in %s is
locked. Please enter
PUK code to unlock.
"Incorrect PIN code of
interface cellular%d.
Please check the PIN
code setting.
"Unable to query the
signal quality from
the device in %s.
Please try to remove
then insert the
device.
"Interface cellular%d
cannot connect to the
service provider.
"Interface cellular%d
is configured with
incorrect APN.
"Interface cellular%d
is configured with
incorrect phone
number.
"Interface cellular%d
is configured with
incorrect username or
password.
"Interface cellular%d
is configured with
device %s, but current
inserted device is %s.
"Cellular device [%s
%s] has been inserted
into %s.
"Cellular device [%s
%s] has been removed
from %s.
788
DESCRIPTION
The SIM card for the cellular device associated with the listed
cellular interface (%d) cannot be detected. The SIM card may
be missing, not inserted properly, or damaged. Remove the
device and check its SIM card. If it does not appear to be
damaged, try re-inserting the SIM card.
The SIM card for the cellular device associated with the listed
cellular interface (%d) is locked. This may be because the PIN
code was entered incorrectly more than three ti m es. You need
to enter the PUK code to unlock the SIM card. .
The listed cellular interface (%d) does has the wrong PIN
code configured.
The ZyWALL could not check the signal strength for the listed
cellular interface (%d). This could be due to an error or being
out of range of the ISP's cellular station.
The listed cellular interface (%d) cannot connect to the ISP.
This could be due to an error or being out of range of the
ISP's cellular station.
The listed cellular interface (%d) does not have the correct
APN (Access Point Name) configured.
The listed cellular interface (%d) does not have the correct
phone number configured.
The listed cellular interface (%d) does not have the correct
user name and password configured.
The listed cellular interface (%d) is configured for a particular
cellular device (first %s), but a different cellular device
(second %s) is inserted.
The cellular device (identified by its manufacturer and model)
has been inserted in or connected to the specified slot.
The cellular device (identified by its manufacturer and model)
has been removed from the specified slot.
ZyWALL USG 20/20W User's Guide