ZyXEL Communications ZYWALL USG 20 Manual page 528

Chapter 32 Anti-Spam
specific subject text. Click a column's heading cell to sort the table entries by that
column's criteria. Click the heading cell again to reverse the sort order.
Figure 312 Configuration > Anti-X > Anti-Spam > Black/White List > Black List
The following table describes the labels in this screen.
Table 147 Configuration > Anti-X > Anti-Spam > Black/White List > Black List
LABEL
General Settings
Enable Black List
Checking
Black List Spam
Tag
Rule Summary
Add
Edit
Remove
Activate
Inactivate
Status
#
Type
Content
Apply
Reset
528
DESCRIPTION
Select this check box to have the ZyWALL treat e-mail that matches
(an active) black list entry as spam.
Enter a message or label (up to 15 ASCII characters) to add to the
mail subject of e-mails that match the ZyWALL's spam black list.
Click this to create a new entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
This is the entry's index number in the list.
This field displays whether the entry is based on the e-mail's subject,
source or relay IP address, source e-mail address, or header.
This field displays the subject content, source or relay IP address,
source e-mail address, or header value for which the entry checks.
Click Apply to save your changes back to the ZyWALL.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG 20/20W User's Guide