The My Certificates Import Screen - ZyXEL Communications ZYWALL USG 20 Manual

Chapter 39 Certificates
Table 179 Configuration > Object > Certificate > My Certificates > Edit
LABEL
OK
Cancel

39.2.3 The My Certificates Import Screen

Click Configuration > Object > Certificate > My Certificates > Import to
open the My Certificate Import screen. Follow the instructions in this screen to
save an existing certificate to the ZyWALL.
Note: You can import a certificate that matches a corresponding certification request
that was generated by the ZyWALL. You can also import a certificate in
PKCS#12 format, including the certificate's public and private keys.
The certificate you import replaces the corresponding request in the My
Certificates screen.
You must remove any spaces from the certificate's filename before you can import
it.
Figure 354 Configuration > Object > Certificate > My Certificates > Import
The following table describes the labels in this screen.
Table 180 Configuration > Object > Certificate > My Certificates > Import
LABEL
File Path
Browse
602
DESCRIPTION
Click OK to save your changes back to the ZyWALL. You can only
change the name.
Click Cancel to quit and return to the My Certificates screen.
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse
to find it.
You cannot import a certificate with the same name as a certificate that is
already in the ZyWALL.
Click Browse to find the certificate file you want to upload.
ZyWALL USG 20/20W User's Guide