Table 99 Configuration > Network > IP/MAC Binding > Summary (continued)
LABEL
Status
Interface
Number of
Binding
Apply
20.2.1 IP/MAC Binding Edit
Click Configuration > Network > IP/MAC Binding > Edit to open the IP/
MAC Binding Edit screen. Use this screen to configure an interface's IP to MAC
address binding settings.
Figure 218 Configuration > Network > IP/MAC Binding > Edit
The following table describes the labels in this screen.
Table 100 Configuration > Network > IP/MAC Binding > Edit
LABEL
IP/MAC Binding Settings
Interface
Name
Enable IP/
MAC
Binding
Enable
Logs for IP/
MAC
Binding
Violation
ZyWALL USG 20/20W User's Guide
DESCRIPTION
This icon is lit when the entry is active and dimmed when the entry is
inactive.
This is the name of an interface that supports IP/MAC binding.
This field displays the interface's total number of IP/MAC bindings and IP
addresses that the interface has assigned by DHCP.
Click Apply to save your changes back to the ZyWALL.
DESCRIPTION
This field displays the name of the interface within the ZyWALL and the
interface's IP address and subnet mask.
Select this option to have this interface enforce links between specific IP
addresses and specific MAC addresses. This stops anyone else from
manually using a bound IP address on another device connected to this
interface. Use this to make use only the intended users get to use
specific IP addresses.
Select this option to have the ZyWALL generate a log if a device
connected to this interface attempts to use an IP address not assigned by
the ZyWALL.
Chapter 20 IP/MAC Binding
361