ZyXEL Communications ZYWALL USG 20 Manual page 586

Chapter 38 Authentication Method
Click OK to save the settings or click Cancel to discard all changes and return to
7
the previous screen.
Figure 348 Configuration > Object > Auth. Method > Add
The following table describes the labels in this screen.
Table 176 Configuration > Object > Auth. Method > Add
LABEL
Name
Add
Edit
Remove
Move
#
Method List
586
DESCRIPTION
Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes
(-), but the first character cannot be a number. This value is case-
sensitive. For example, "My_Device".
Click this to create a new entry. Select an entry and click Add to create a
new entry after the selected entry.
Double-click an entry or select it and click Edit to open a screen where
you can modify the entry's settings.
To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
To change a method's position in the numbered list, select the method
and click Move to display a field to type a number for where you want to
put it and press [ENTER] to move the rule to the number that you typed.
The ordering of your methods is important as ZyWALL authenticates the
users using the authentication methods in the order they appear in this
screen.
This field displays the index number.
Select a server object from the drop-down list box. You can create a
server object in the AAA Server screen (see
more information).
The ZyWALL authenticates the users using the databases (in the local
user database or the external authentication server) in the order they
appear in this screen.
If two accounts with the same username exist on two authentication
servers you specify, the ZyWALL does not continue the search on the
second authentication server when you enter the username and
password that doesn't match the one on the first authentication server.
Chapter 37 on page 573
ZyWALL USG 20/20W User's Guide
for