System; Overview; What You Can Do In This Chapter - ZyXEL Communications ZYWALL USG 20 Manual

C
H A P T E R

43.1 Overview

Use the system screens to configure general ZyWALL settings.

43.1.1 What You Can Do in this Chapter

• Use the System > Host Name screen (see
configure a unique name for the ZyWALL in your network.
• Use the System > USB Storage screen (see
configure the settings for the connected USB devices.
• Use the System > Date/Time screen (see
configure the date and time for the ZyWALL.
• Use the System > Console Speed screen (see
configure the console port speed when you connect to the ZyWALL via the
console port using a terminal emulation program.
• Use the System > DNS screen (see
DNS (Domain Name System) server used for mapping a domain name to its
corresponding IP address and vice versa.
• Use the System > WWW screens (see
settings for HTTP or HTTPS access to the ZyWALL and how the login and access
user screens look.
• Use the System > SSH screen (see
SSH (Secure SHell) used to securely access the ZyWALL's command line
interface. You can specify which zones allow SSH access and from which IP
address the access can come.
• Use the System > TELNET screen (see
Telnet to access the ZyWALL's command line interface. Specify which zones
allow Telnet access and from which IP address the access can come.
• Use the System > FTP screen (see
which zones FTP can be used to access the ZyWALL. You can also specify from
which IP addresses the access can come. You can upload and download the
ZyWALL's firmware and configuration files using FTP. Please also see
on page 693
ZyWALL USG 20/20W User's Guide
for more information about firmware and configuration files.

System

Section 43.2 on page
Section 43.2 on page
Section 43.4 on page
Section 43.5 on page
Section 43.6 on page 636) to configure the
Section 43.7 on page
Section 43.8 on page 661) to configure
Section 43.9 on page
Section 43.10 on page
43
630) to
630) to
631) to
636) to
644) to configure
666) to configure
668) to specify from
Chapter 45
629