ZyXEL Communications ZYWALL USG 20 Manual page 791

Table 258 Interface Logs (continued)
LOG MESSAGE
name=%s,status=%s,TxP
kts=%u,
RxPkts=%u,Colli.=%u,T
xB/s=%u,
RxB/s=%u,UpTime=%s
Interface %s has been
renamed from '%s' to
'%s '
Table 259 WLAN Logs
LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
System internal error.
Error enabling WPA/
802.1X!
Station has
associated. Interface:
%s, MAC: %s.
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
ZyWALL USG 20/20W User's Guide
DESCRIPTION
This log is sent to the VRPT server to show the specified PPP/
Cellular interface's statistics and uptime.
The arguments represent the interface name, interface
status, interface Tx packets, interface Rx packets, interface
collision packets, interface Tx Bytes/s, interface Rx Bytes/s,
and interface up time.
The user-configurable name of the specified interface
(internal system name) has been renamed from one name to
another.
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned
on. %s is the slot number where the WLAN card is or can be
installed.
The WLAN (IEEE 802.11 b and or g) feature has been turned
off. %s is the slot number where the WLAN card is or can be
installed.
The WLAN (IEEE 802.11 b and or g) feature's configuration
has been changed. %s is the slot number where the WLAN
card is or can be installed.
The configuration of the specified WLAN interface (%s) has
been changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN
interface (%s). Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The ZyWALL was not able to configure the wireless device to
use WPA. Remove the wireless device and reinstall it.
The ZyWALL was not able to enable WPA/IEEE 802.1X.
A wireless client with the specified MAC address (second %s)
associated with the specified WLAN interface (first %s).
There was an EAP timeout for a wireless client connected to
the specified WLAN interface (first %s). The MAC address of
the wireless client is listed (second %s).
Appendix A Log Descriptions
791