ZyXEL Communications ZYWALL USG 20 Manual page 729

The ZyWALL checks the firewall rules in the order that they are listed. So make
sure that your custom firewall rule comes before any other rules that the traffic
would also match.
I cannot enter the interface name I want.
• The format of interface names other than the Ethernet interface names is very
strict. Each name consists of 2-4 letters (interface type), followed by a number
(x, limited by the maximum number of each type of interface). For example,
VLAN interfaces are vlan0, vlan1, vlan2, ...; and so on.
I cannot set up a PPP interface, virtual Ethernet interface or virtual VLAN interface
on an Ethernet interface.
You cannot set up a PPP interface, virtual Ethernet interface or virtual VLAN
interface if the underlying interface is a member of a bridge. You also cannot add
an Ethernet interface or VLAN interface to a bridge if the member interface has a
virtual interface or PPP interface on top of it.
My rules and settings that apply to a particular interface no longer work.
The interface's IP address may have changed. To avoid this create an IP address
object based on the interface. This way the ZyWALL automatically updates every
rule or setting that uses the object whenever the interface's IP address settings
change. For example, if you change LAN1's IP address, the ZyWALL automatically
updates the corresponding interface-based, LAN1 subnet address object.
I cannot set up a PPP interface.
You have to set up an ISP account before you create a PPPoE or PPTP interface.
The data rates through my cellular connection are no-where near the rates I
expected.
ZyWALL USG 20/20W User's Guide
Chapter 50 Troubleshooting
729