The Adp General Screen - ZyXEL Communications ZYWALL USG 20 Manual

29.2 The ADP General Screen

Click Configuration > Anti-X > ADP > General. Use this screen to turn
anomaly detection on or off and apply anomaly profiles to traffic directions.
Figure 288 Configuration > Anti-X > ADP > General
The following table describes the screens in this screen.
Table 133 Configuration > Anti-X > ADP > General
LABEL
General Settings
Enable
Anomaly
Detection
Policies
Add
Edit
Remove
Activate
Inactivate
Move
#
Priority
ZyWALL USG 20/20W User's Guide
DESCRIPTION
Select this check box to enable traffic anomaly and protocol anomaly
detection.
Use this list to specify which anomaly profile the ZyWALL uses for
traffic flowing in a specific direction. Edit the policies directly in the
table.
Click this to create a new entry. Select an entry and click Add to
create a new entry after the selected entry.
Select an entry and click this to be able to modify it.
Select an entry and click this to delete it.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
To change an entry's position in the numbered list, select it and click
Move to display a field to type a number for where you want to put
that entry and press [ENTER] to move the entry to the number that
you typed.
This is the entry's index number in the list.
This is the rank in the list of anomaly profile policies. The list is
applied in order of priority.
Chapter 29 ADP
469