ZyXEL Communications ZYWALL USG 20 Manual page 782

Appendix A Log Descriptions
Table 256 NAT Logs (continued)
LOG MESSAGE
%s SIP ALG has
succeeded.
Extra signal port of
SIP ALG has been
modified.
Signal port of SIP ALG
has been modified.
Register SIP ALG extra
port=%d failed.
Register SIP ALG
signal port=%d failed.
Register H.323 ALG
extra port=%d failed.
Register H.323 ALG
signal port=%d failed.
Register FTP ALG extra
port=%d failed.
Register FTP ALG
signal port=%d failed.
Table 257 PKI Logs
LOG MESSAGE
Generate
X509certifiate "%s"
successfully
Generate X509
certificate "%s"
failed, errno %d
Generate certificate
request "%s"
successfully
Generate certificate
request "%s" failed,
errno %d
Generate PKCS#12
certificate "%s"
successfully
Generate PKCS#12
certificate "%s"
failed, errno %d
782
DESCRIPTION
The SIP ALG has been turned on or off. %s: Enable or Disable
Extra SIP ALG port has been changed.
Default SIP ALG port has been changed.
SIP ALG apply additional signal port failed.
%d: Port number
SIP ALG apply signal port failed.
%d: Port number
H323 ALG apply additional signal port failed.
%d: Port number
H323 ALG apply signal port failed.
%d: Port number
FTP ALG apply additional signal port failed.
%d: Port number
FTP ALG apply signal port failed.
%d: Port number
DESCRIPTION
The router created an X509 format certificate with the
specified name.
The router was not able to create an X509 format certificate
with the specified name. See
details about the error number.
The router created a certificate request with the specified
name.
The router was not able to create a certificate request with
the specified name. See
about the error number.
The router created a PKCS#12 format certificate with the
specified name.
The router was not able to create anPKCS#12 format
certificate with the specified name. See
784 for details about the error number.
Table 282 on page 784
Table 282 on page 784 for details
Table 282 on page
ZyWALL USG 20/20W User's Guide
for