Tables And Lists - ZyXEL Communications ZyWALL USG Series User Manual

Table 5 Configuration Menu Screens Summary (continued)
FOLDER OR LINK TAB
Dial-in Mgmt.
Vantage CNM
Language
IPv6
Log & Report
Email Daily
Report
Log Setting
Maintenance Menu
Use the maintenance menu screens to manage configuration and firmware files, run diagnostics,
and reboot or shut down the ZyWALL.
Table 6 Maintenance Menu Screens Summary
FOLDER
OR LINK
File
Manager
Diagnostics Diagnostic
Packet
Flow
Explore
Reboot
Shutdown

1.4.4 Tables and Lists

Web Configurator tables and lists are flexible with several options for how to display their entries.
Click a column heading to sort the table's entries according to that column's criteria.
Figure 11 Sorting Table Entries by a Column's Criteria
ZyWALL USG 20-2000 User's Guide
TAB FUNCTION
Configuration File Manage and upload configuration files for the ZyWALL.
Firmware Package View the current firmware version and to upload firmware.
Shell Script Manage and run shell script files for the ZyWALL.
Collect diagnostic information.
Packet Capture Capture packets for analysis.
System Log Connect a USB device to the ZyWALL and archive the ZyWALL system logs
to it here.
Routing Status Check how the ZyWALL determines where to route a packet.
SNAT Status View a clear picture on how the ZyWALL converts a packet's source IP
address and check the related settings.
Restart the ZyWALL.
Turn off the ZyWALL.
FUNCTION
Configure settings for an out of band management connection
through a modem connected to the AUX port.
Configure and allow your ZyWALL to be managed by the Vantage
CNM server.
Select the Web Configurator language.
Enable IPv6 globally on the ZyWALL here.
Configure where and how to send daily reports and what reports to
send.
Configure the system log, e-mail logs, and remote syslog servers.
Chapter 1 Introduction
17