Table of Contents
Advertisement
14.1 Overview
This chapter shows you how to configure static routes for your EMG3425-Q10A.
The EMG3425-Q10A usually uses the default gateway to route outbound traffic from computers on
the LAN to the Internet. To have the EMG3425-Q10A send data to devices not reachable through
the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the EMG3425-Q10A's LAN
interface. The EMG3425-Q10A routes most traffic from A to the Internet through the EMG3425-
Q10A's default gateway (R1). You create one static route to connect to services offered by your ISP
behind router R2. You create another static route to communicate with a separate network behind
a router R3 connected to the LAN.
Figure 64 Example of Static Routing Topology
A
R3
14.2 IP Static Route Screen
Click Network > Static Route to open the Static Route screen.
C
LAN
WAN
EMG3425-Q10A User's Guide
111
HAPTER
Static Route
R1
R2
1 4
Advertisement
Table of Contents
