Configure Zones - ZyXEL Communications ZyWALL USG 200 Series User Manual

Chapter 7 Tutorials
Click Configuration > Network > Interface > Ethernet and double-click the
1
opt interface's entry.
Set the Interface Type to internal.
Set the IP Address to 192.168.4. and the Subnet Mask to 255.255.255.0.
Set DHCP to DHCP Server and click OK.
Figure 62 Configuration > Network > Interface > Ethernet > Edit opt

7.1.3 Configure Zones

Do the following to create a VPN zone.
Click Configuration > Network > Zone and then the Add icon.
1
118
ZyWALL USG 100/200 Series User's Guide