marposs IWAVE2 Instruction Manual page 77

7.2
Stand charger
Problem
No LED is lit.
Red LED is lit.
WARNING:
The object might be hot.
Green LED is lit even
after placing the handle
inside
Blue LED is lit even after
removing the handle.
Possible cause
No power.
Foreign object detected.
Handle malfunction
detection.
Handle malfunction
detection.
Chapter 7  TROUBLESHOOTING
Remedy
Check the connection to
the power supply
Remove any object from
the stand. If the problem
persists contact Marposs.
Contact Marposs.
If the LED does not turn
off within 5 seconds,
contact Marposs.
77