marposs IWAVE2 Instruction Manual page 53

5.3.3.5 Factory settings

Initial condition :

Access mode :
 Description:
 Level change:
Factory Settings ON
5.3.4 Stand alone mode

Initial condition:

Access mode:

Description:
Handle switched Off
Simultaneous pressure of 2 buttons
then press of only one of the two buttons (
It allows to reset handle to the factory settings.
Click ( blue).
Handle switched off and radio mode disabled.
Click one of the two buttons (
of the handle (If active).
Allows measurements to be made without the need for a
PC or an electronic unit connected.
Stand Alone measure
Chapter 5  INSTRUCTIONS FOR USE
.
(
Factory Settings OFF
red) and
blue).
blue) or movement
53