marposs IWAVE2 Instruction Manual page 20

2.2.5 Display Unit
I-Wave2/Wave2
The
the required pairing), and in Stand-Alone mode, i.e. not connected to the electronic unit.
2.2.5.1 Marposs electronic units and software
The use of the I-Wave2 / Wave2 handle with Marposs electronics and software is
allowed only after the installation of 'Wave2 Driver'.
The following table shows the different compatibilities.
Table 2-2. Handle compatibility with Marposs electronics and software.
Elettronic/Software
E9066
Merlin Family
Nemo
Duo
QuickSPC Windows
Easy Acquisition 3.6.0
Drivers Library 3.2A
EasyWedge v3.0
Merlin Plus software
R2G
Please refer to "Wave2
Easy Wedge, Easy Acquisition and Drivers library Marposs software.
For the use with Merlin, Merlin Plus and Merlin Plus Box
is required.
For more details, please refer to the User Manual of Electronic unit.
For the use with Merlin Plus Software and R2G application, refer to the Software
Manual.
2.2.5.2 R2G applications
The R2G application allows to program the
absence of the electronic unit.
For more details, please refer to
from www.marposs.com in the dedicated
20
/
handle can work both connected with electronic units ( after
I-Wave2
Available soon
Not compatible
XP/VISTA/7/8/10 compatibility
QSPCW 3.7C up to
QSPCW v3.7G
Win7/8/10 compatibility from
QSPCW v.3.8
with Wave2 Driver v3.1.0 or
higher
with Wave2 Driver v3.1.0 or
higher
with Wave2 Driver v3.1.0 or
higher
Driver" manual for more details for the use with Quick SPC
I-Wave2
- Instruction Manual
Wave2
Available soon
Available soon
Not compatible
XP/VISTA/7/8/10 compatibility
from QSPCW v3.8
+ Patch SM2P000057
with Wave2 Driver v3.4.0 or
higher
with Wave2 Driver v3.4.0 or
higher
-
Available soon
Available soon
software no driver installation
TM
I-Wave2
operating parameters in
Ready2Gauge manual (downloadable
I-Wave2
section).
,
TM