marposs IWAVE2 Instruction Manual page 65

6.2.3 Plug head replacement procedure
1) Make sure to use the correct adapter (see 6.2.1 and 0 paragraphs).
2)
Screw the adapter (1) to the plug head (2).
3) The mechanical interface is a steel adapter screwed on to the thread of
the plug head and forms a small sub assembly. Insert the sub-assembly
formed by the plug head and the adapter into the corresponding housing,
making sure that the adapter is flush.
1
Chapter 6  INSTALLATION OF PLUG HEAD
2
16/AF
65