marposs IWAVE2 Instruction Manual page 50

5.3.3.1 Radio mode

Initial condition :

Access mode :

Description:
Radio ON
50
/
Handle switched Off
Simultaneous pressure of the 2 buttons
It allows to enable/disable the radio mode, therefore
it changes between "connected to an electronic unit
mode" and "Stand-Alone mode":
 Status change (On/Off): Click (
 Pressure of only one of the two buttons
( blue) to move to the next parameter.
 Long pressure of only one of the two buttons
( blue) to exit the SETUP menu and return
to the start conditions (START).
- Instruction Manual
.
Radio OFF
( red).
blue).