marposs IWAVE2 Instruction Manual page 19

2.2.4 Dongle description
The Dongle is used to connect the handle to the electronic unit (see Table 2-2) or to a
PC with S.O. Windows
Refer to the manual "driver W AVE2
For use with PC it is necessary to install the W AVE2 driver supplied with the
Marposs software (Quick SPC
Drivers library ).
TM
No special operations are required for use after installation.
There are two different models of Dongles (see Figure 2-5), supplied according to the
country of destination of the product:
1. Dongle Silabas code 6872020047 (for Brazil, India and Mexico)
2. Dongle Bluegiga code 6872020044 (intended for all other countries).
Figure 2-5. Dongle.
The compatibility of the Driver or the Dongle used with the O.S. present today is shown
in the following table:
Table 2-1. Driver and Dongle compatibility.
Dongle Windows XP
6872020044
6872020047
® 7 or later.
TM
TM
, Easy Wedge
TM
Up to Wave2
Driver v 3.1.0
-
for further compatibility.
, Easy Acquisition
TM
Windows
Vista
Up to Wave2 All Wave2 Driver
Driver v 3.1.0
-
Capitolo 2  INTRODUCTION
, R2G and
TM
Windows 7 Windows 10
(32-64 bit)
versions Driver versions
From Wave2
Driver v 3.2.0 Driver v 3.2.0
(32-64 bit)
All Wave2
From Wave2
19