marposs IWAVE2 Instruction Manual page 56

5.3.5 Use with electronic unit

Initial condition:

Access mode:

Description:
WARNING
To make a measurement it is necessary to have previously carried out
the pairing between the handle and the electronic unit.
INFORMATION
i
Using the Marposs electronic unit, it is possible to select 2 operating
modes of the handle:


(for more details refer to the Instruction manual of the electronic unit).
56
/
Handle switched off and radio enabled.
Click one of the two buttons (
Access to the measure connected to the electronic unit.
Connected measure
Standard use mode
Free Run use mode
- Instruction Manual
blue).