marposs IWAVE2 Instruction Manual page 55

5.3.4.3 Transducer zeroing

Initial condition:

Access mode:

Description:
INFORMATION
i
A wrong transducer zeroing can limit the measuring range of the
handle, for example if the operation is performed with an incorrectly
mounted plug.
WARNING
The only way to reset a transducer zeroing is through a factory reset.
Such operation must be performed every time the plug is changed.
Measure hold.
Simultaneous pressure of the 2 buttons (
It allows the transducer zeroing.
Transducer zeroing
Chapter 5  INSTRUCTIONS FOR USE
red).
55