marposs IWAVE2 Instruction Manual page 26

3.2
Stand charger
General characteristics
Power supply
Weight
Environment
Degree of protection
Position
Type of installation / use
Impact energy level
i
S.E.L.V.: Safety Extra Low Voltage as defined in EN60950-1.
3.2.1 Power Supply
Power supply for single charger cod.
2T0IRCS010
Power supply for multiple charger cod.
2T0IRSS010
Altitude
Pollution degree
Degree IK
Environment
Position
Type of installation / use
Overvoltage Category
Type of connection to the AC network
26
/
Input
Output
Input
Output
Max 5000 m
2 (EN 61010-1)
IK07
As from method EN 61010-1 clause 8.1 the
impact test with ball
5°C - 45°C
maximum 80% relative humidity
Dry (EN 61010-1)
indoor
II (EN 61010-1)
F-N-PE
- Instruction Manual
24V CC +/- 10%, 0,15 A
(Must be S.E.L.V. type, see Note
below)
1,5 Kg
5°C - 45°C
maximum 80% relative humidity
IP 54
Dry (EN 61010-1)
indoor
IK07 (energy level applied: 2 joules)
Clause 8.2.2 standard EN 61010-1:
2010
100-240V~ / 50-60 Hz / 0,63 mA
24V / 0,63A
100-240V~ / 50-60 Hz / 1,25 mA
24V / 1,25A