marposs IWAVE2 Instruction Manual page 37

4.4 Power supply
The power supply is available in two versions:
1. Power supply for single Stand charger
2. Power supply for multiple Stand chargers
WARNING
Position the connecting the power supply to the power supply network
in such a way that the operator can easily access for sectioning the
circuit in the event of need.
4.5 Dongle
The Dongle requires no configuration for use, except for the installation of a Marposs
measurement software compatible with
paragraph 0 or the "Wave2 Driver" manual).
I-Wave2/Wave2
on the electronic unit (refer to
Chapter 4  INSTALLATION
37