Media Cutter Option
Cutters are designed to cut tags and label liner. Avoid cutting through the
adhesive backed portion of any media.
Cutter
The cutter is designed to cut tags and label liner.
Table 24. 4, 6, and 8 inch Models
Typical Life
Warranty
Environment
Cutting Method
Media Thickness Range
Media Width Range
Media Length Range
Host Interfaces
Table 25. Host Interface Characteristics
1. Serial RS-232 or RS-422 at 600, 1200, 2400, 4800, 9600, 19200,
38400, 57600, or 115200 baud.
2. Parallel (Centronics compatible) or IEEE 1284 bi-directional.
3. USB 2.0
The RS-232 and optional RS-422 host interfaces shall have the following
characteristics:
Word Length:
Handshaking:
Input Buffer:
> 1,000,000 cuts
500,000 cuts
Same specifications as printer
Rotating single-edged blade
0.0025 to 0.010 in. (0.064 to 0.254 mm)
Same range as printer
1.00 to 99 in. (25.4 to 2515 mm)
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and
CTS/DTR
Selectable from 1k through 16 kbytes. XOFF is
transmitted and DTR goes low when buffer is
equal to or less than 25% of full. XON is
transmitted and DTR goes high when buffer is
25% above empty. Characters are transmitted
with no parity from the printer
Media Cutter Option
351