Offpage Errors; Optimized Ratio - Printronix SL5000r User Manual

Null Suppression (Coax, TN3270)
This item allows the printer to either treat nulls as blank spaces or ignore
them. If nulls are ignored, the print position does not move.
•
Off (the default). Ignores nulls.
•
On. Treats nulls as spaces.
Null Suppression (IPDS)
•
Disable (the default). When disabled, an exception is generated when the
IPDS data stream contains an 0x00.
•
Enable. When enabled, this option ignores the EBCDIC value 0x00 in the
IPDS data stream.

Offpage Errors

•
Disable (the default). Does not report errors for elements that start or end
beyond the right edge of the page.
•
Enable. Reports errors for elements that start or end beyond the right
edge of the page.

Optimized Ratio

This option selects different bar code ratios for certain bar codes including
Code 39 and Interleaved 2 of 5. It is included for compatibility with the IGP-
X00 printers.
•
Disable (the default). Use standard bar code ratios.
•
Enable. Select the alternate bar code ratios.
Overstrike
Overstrike determines the action required when a line is printed over a
previous line because a carriage return was received without a line feed.
•
Enable (the default). Prints the second line on top of the first line.
•
Disable. Replaces the characters from the first line with the second line.
PA1
PA1 is only valid when the printer is in the offline state and the coax Systems
Network Architecture Character Set (SCS) data stream is active. This function
displays the "PA1 ENABLED" message when the ENTER key is pressed, and
sends a special operator request to the host when the printer is put back
online. Refer to the Coax/Twinax Programmer's Reference Manual for more
information about SCS.
NOTE: Selecting PA1 again ("PA1 DISABLED" appears on the operator
panel) or selecting PA2 will reset the pending PA1 function.
Emulation Submenus
Overview
221